How can I configure 17 seperate outlets? Cable Modems and Wiring Issues2 Per Room(In Case We Move TV To The Other Side Of Room), So 16 Splits + A Cable Modem
What's The Best Way To Do This?
Will I Need Terminators On The 8 Unused Splits,
Should I Terminate At The Splitter Or The Jacks?
This is a special situation and I highly recommend you get a 2 port AMP from your cable company.
My suggestion: Input going into 2 way splitter, one which goes to the cable modem, and the other going into the 2 port amp, and each port of the amp going into an 8 way splitter. This is of course if you want to have all 17 outlets active at once.
If you're just going to have 9 active, just use a one port amp going to a single 8 way. In this case you might not even need to use an AMP, depending on how strong of a signal the cable co pushes into your house.
Hope this helps!
feedback form
by xer008 edited by Raydr
last modified: 2002-08-08 21:30:37