[Equipment] CYT & PAP2 problems Page 2

[Equipment] CYT & PAP2 problems Page 2
Links: home · search · speed test · login · more ·

Links: Reply New Topic
Forums » Voice Over IP - VOIP » VOIP Tech Chat » [Equipment] CYT & PAP2 problems
page: 1 · 2
drdr6 @ 21st Feb 09:58AM:
Re: [Equipment] CYT & PAP2 problems

Ok, interesting result.

First, following your procedure I get 192.168.15.1 - but that's after having previously set static IP through the web admin page.

So I do a reset via the back panel switch and the voice I/F reports 0.0.0.0. But after reconnecting to the laptop, the voice I/F reports 192.168.15.254. I know there is no DHCP on the laptop, and wireshark shows the DHCP requests don't get answered, so it must be assuming 254 once it sees link up and no response from the DHCP server.

I'm guessing that for some reason CYT can't do the unlocking when PAP2 has a static IP then ?
reply

drdr6 @ 28th Feb 07:11AM:
Re: [Equipment] CYT & PAP2 problems

Ok, so I'm back at base, and I have some closure for those kind folks who offered help last week.

Bringing the PAP2 up on my home system (with the DSL disconnected) I did the following

1) Factory reset. This reset the IP from static to DHCP

2) Brought the box up, and then connected the network: **** 110# reported 192.168.15.254 as IP address. Interesting! owing to netmask settings, unable to reach the PAP2

3) Powered the box up and brought it up again with the network connected. This time it reported 192.168.2.110, which is on the right subnet for my home network.

4) Accessed the box as admin/admin; worked fine (as before)

5) Started cyt46 and set the IP address. Noted MUCH longer delay than before (about 15 seconds, rather than instantaneous) getting information from the PAP2. Same information displayed, though.

6) After about 30 seconds delay, cyt46 completed and said that it had reset Admin to Admin and user to user.

7) Was able to go to /Provision.html and enter Admin/Admin and see details like the encryption key. Magic!

=======

So my (not very well proven) conclusion is that cyt46 may or may not work properly when the PAP2 has a static IP address.

Can anyone give me any pointers to interesting IP phone providers / deals in UK & US at the moment - where's the bes t place to look ?

Thanks all!
reply

mazilo @ 28th Feb 07:30AM:
Re: [Equipment] CYT & PAP2 problems

said by drdr6 :

So my (not very well proven) conclusion is that cyt46 may or may not work properly when the PAP2 has a static IP address.

That is an interesting observation that I will keep a note on it.
reply