Tomato/MLPPP v3 alpha 6 released! Page 4

Tomato/MLPPP v3 alpha 6 released! Page 4
Links: home · search · speed test · login · more ·

Links: Reply New Topic
Forums » Canadian » TekSavvy » Tomato/MLPPP v3 alpha 6 released!
page: 1 · 2 · 3 · 4 · 5
Leathal @ 22nd Oct 06:33AM:
Re: Tomato/MLPPP v3 alpha 6 released!

I am not sure what the 1:1 NAT issue is? Does it work or not if I have TekSavvy's extra pool of IPs, so if I have the first static IP which is assigned to my PPPoE login and then I purchase an additional pool of 2 or more IPs will Tomato support this?

Also can I take the other IPs and assign them to local IPs on the router itself?

example router:

IP: 10.0.0.1
GW: 255.255.255.0

Internet IP: 76.120.xxx.xxx
Pool IPs: 76.149.xxx.1/2

and then from inside the Tomato I can assign 10.0.0.5 to 76.149.xxx.1 and 10.0.0.6 to 76.149.xxx.2 ?

This way on my firewall I can assign 10.0.0.4 to 6 to it! :)

Leathal
reply

vajonam @ 22nd Oct 10:03AM:
Re: Tomato/MLPPP v3 alpha 6 released!

I also notice the "Waiting Icon" is missing in your builds. The icons near the refresh that basically a spinning ring. Just cosmetic, wanted to let you know.I think its called spin.gif and supposed to be in the root.

its called /www/_spin.gif for whatever reason in alpha6
reply

vajonam @ 22nd Oct 10:26AM:
Re: Tomato/MLPPP v3 alpha 6 released!

Looks like dropbear is also broken? Can anyone else SSH into the router?

# dropbear -s 22 -F
Aiee, segfault! You should probably report this as a bug to the developer

every time i try to login to the router through ssh.

maybe the /etc/dropbear/dropbear_rsa_host_key is corrupt, it seems 1 byte shorter than in the 1.25,specifically its missing the the two "==" at the end of the key.
reply

olebiker @ 22nd Oct 10:41AM:
Re: Tomato/MLPPP v3 alpha 6 released!

Finally loaded the new firmware. Had an unscheduled power outage so good time to do that before the next one hits. Works great thanks DSL Ricer and Guspaz.
reply

CoverIt @ 22nd Oct 10:51AM:
Re: Tomato/MLPPP v3 alpha 6 released!

said by Leathal :

I am not sure what the 1:1 NAT issue is? Does it work or not if I have TekSavvy's extra pool of IPs, so if I have the first static IP which is assigned to my PPPoE login and then I purchase an additional pool of 2 or more IPs will Tomato support this?

Also can I take the other IPs and assign them to local IPs on the router itself?

example router:

IP: 10.0.0.1
GW: 255.255.255.0

Internet IP: 76.120.xxx.xxx
Pool IPs: 76.149.xxx.1/2

and then from inside the Tomato I can assign 10.0.0.5 to 76.149.xxx.1 and 10.0.0.6 to 76.149.xxx.2 ?

This way on my firewall I can assign 10.0.0.4 to 6 to it! :)

Leathal

Exactly what 1:1 Nat does.

Local IP's to Public both inbound and outbound.

Your examples above is exactly how it works
--
Please take a moment and visit »www.competitivebroadband.com/consumer/
reply

vajonam @ 22nd Oct 11:35AM:
Re: Tomato/MLPPP v3 alpha 6 released!

Also see a

Failed reading '/etc/dropbear/dropbear_dss_host_key', disabling DSS

in the logs, seems to leaning towards a corrupt key.
reply

Kennaley @ 22nd Oct 05:54PM:
Re: Tomato/MLPPP v3 alpha 6 released!

tested and run very will, just wished it has IP/MAC Bandwidth Limiter.
reply

dcorreia @ 22nd Oct 06:29PM:
Re: Tomato/MLPPP v3 alpha 6 released!

Getting same thing here on the -ND version.

Oct 22 18:27:08 router1 authpriv.warn dropbear[599]: Failed reading '/etc/dropbear/dropbear_dss_host_key', disabling DSS

Oct 22 18:27:20 router1 authpriv.info dropbear[602]: exit before auth: Premature kexdh_init message received

-Dan
reply

ragingwolf @ 22nd Oct 07:01PM:
Re: Tomato/MLPPP v3 alpha 6 released!

Awesome, now I can test out the TCP Vegas feature and see if it ends up working better than QOS.

Thanks again for the great work guys, keep it up :D
reply

vajonam @ 22nd Oct 07:50PM:
Re: Tomato/MLPPP v3 alpha 6 released!

Sorry to burst your bubble about TCP Vegas.

»www.linksysinfo.org/forums/showp···count=34

The "TCP Vegas".. they do nothing... !
reply

IIgs @ 22nd Oct 10:18PM:
Re: Tomato/MLPPP v3 alpha 6 released!

Since alpha version 6 is my FIRST EVER use of Tomato, you'll have to bare with me, as I have nothing to it compare against. I'm solely using it as a means to circumvent throttling here.

Just started noticing I'm getting very poor performance (in some cases I'm still being completely throttled on some torrents) when connected to my WRT54G. Interestingly, when I bypass it and do a direct modem connection and use Windows built-in software MLPPP option, everything works beautifully...torrent speeds are optimal and there's no sign of being throttled.

Is there some option I've missed in the router setup? After installing alpha 6, all I did was set MLPPP to 'single link', nothing else. I heard a mention of QoA, should this be enabled? (in my settings it's currently disabled).
reply

olebiker @ 23rd Oct 08:36AM:
Re: Tomato/MLPPP v3 alpha 6 released!

said by IIgs :

Since alpha version 6 is my FIRST EVER use of Tomato, you'll have to bare with me, as I have nothing to it compare against. I'm solely using it as a means to circumvent throttling here.

Just started noticing I'm getting very poor performance (in some cases I'm still being completely throttled on some torrents) when connected to my WRT54G. Interestingly, when I bypass it and do a direct modem connection and use Windows built-in software MLPPP option, everything works beautifully...torrent speeds are optimal and there's no sign of being throttled.

Is there some option I've missed in the router setup? After installing alpha 6, all I did was set MLPPP to 'single link', nothing else. I heard a mention of QoA, should this be enabled? (in my settings it's currently disabled).

I don't know what is happening but it is not "being throttled". If Qos is disabled it should be fine perhaps Guspaz might have some ideas.
reply

shubjero @ 23rd Oct 11:19AM:
Re: Tomato/MLPPP v3 alpha 6 released!

Upgraded.

Everything's working fine thus far.

Thanks for the hard work to everyone involved with this firmware. Without it, I wouldn't be with Teksavvy.
reply

MarkARC @ 31st Oct 08:16PM:
Re: Tomato/MLPPP v3 alpha 6 released!

said by Redfox :

What's MSS?

I just did this and it worked. Then I changed option one by one, so far it's still working. :) I have not input my QoS settings yet.

At the first time, I did this:
1. Upgraded from 1.21mp3a4 to 1.25mp3a6;
2. reset NVRAM
3. change options manually.

I have the same problem as Redfox, when i run in single link PPP, my web browsing gets slower and and websites are page cannot be displayed. If i turn off Single Layer PPP, the issue goes away. I configured QOS and my router as per »mlppp.teksavvy.com/tomato_sl.html. What can I do to fix this?

I have Velcom, too.

Thanks!
reply

alpovs @ 2nd Nov 12:31PM:
Re: Tomato/MLPPP v3 alpha 6 released!

said by MarkARC :

I have the same problem as Redfox, when i run in single link PPP, my web browsing gets slower and and websites are page cannot be displayed. If i turn off Single Layer PPP, the issue goes away. I configured QOS and my router as per »mlppp.teksavvy.com/tomato_sl.html. What can I do to fix this?

I have Velcom, too.

Thanks!

That setup was specific to Teksavvy as I remember. Leave MTU and MRRU in "Automatic". And LCP Echo Interval should be 5, LCP Echo Adaptive Interval: 0.

I am with Velcom and don't have any problems.
reply

lightrush @ 6th Nov 10:10AM:
Re: Tomato/MLPPP v3 alpha 6 released!

Thank you very much for this release. The updated QoS works flawless!
reply

alpovs @ 6th Nov 10:53AM:
Re: Tomato/MLPPP v3 alpha 6 released!

Does anyone use Asus WL-500gP v.2 with this release? How is QoS?
reply

kewlkeed @ 6th Nov 12:01PM:
Re: Tomato/MLPPP v3 alpha 6 released!

I just wanted to add from the other topic...

Should add some kind of humorous tag line, "Bucking Fell since xxx..."

:D
reply

xtrike @ 9th Nov 08:25PM:
Re: Tomato/MLPPP v3 alpha 6 released!

Anyone know what happening here :s?

Nov 9 20:13:43 ? daemon.warn miniupnpd[161]: HTTP Connection closed inexpectedly
Nov 9 20:14:30 ? daemon.warn miniupnpd[161]: HTTP Connection closed inexpectedly
Nov 9 20:15:11 ? daemon.warn miniupnpd[161]: HTTP Connection closed inexpectedly
Nov 9 20:15:50 ? daemon.warn miniupnpd[161]: HTTP Connection closed inexpectedly

Keep getting that each minutes for around 10 minutes...
reply

Guspaz @ 10th Nov 11:47AM:
Re: Tomato/MLPPP v3 alpha 6 released!

Perhaps you're using an application with broken upnp support?

The upnp daemon changed (as in, completely different) in alpha 6 (mainline Tomato changed it), but we don't have any patches for it at the moment (haven't ported the 1:1 NAT UPnP stuff over yet).
reply

Striker317 @ 11th Nov 02:30AM:
Re: Tomato/MLPPP v3 alpha 6 released!

Any chance of integrating the fixes from the beta 1.26 versions of Tomato?

Some of the updates look relevant to the cause (i.e. updated miniupnpd, busybox etc)

See near the bottom of this page »www.polarcloud.com/tomato
reply

Guspaz @ 11th Nov 12:10PM:
Re: Tomato/MLPPP v3 alpha 6 released!

No. We will never merge beta code into Tomato/MLPPP. It's a recipe for disaster.
reply